KSIC 27219—Manufacture of other measuring, testing, navigating, control instrumensts n.e.c.

Where 27219 sits

1. C Manufacturing
2. 27 Manufacture of medical, precision and optical instruments, watches and clocks
3. 272 Manufacture of measuring, testing, navigating and control equipment; except optical instruments
4. 2721 Manufacture of measuring, testing, navigating, control and other precision instrumensts
5. 27219 Manufacture of other measuring, testing, navigating, control instrumensts n.e.c.

Description

This refers to industrial activities manufacturing instruments for measurement, inspection, testing, and analysis, such as precision measuring weight balances, non-optical microscopes, and diffractometers. It also includes industrial activities manufacturing various types of drafting tools, design tools, and hand-type length measuring instruments such as rulers and measuring rods.

Example activities

• manufacture of non-optical microscopes
• manufacture of non-optical diffractometers
• manufacture of micrometers
• manufacture of calipers
• manufacture of measuring rulers
• manufacture of drafting calculation tools
• manufacture of weight balances (with a weight of 50 milligrams or less)
• manufacture of hand-type precision measuring instruments for technicians

Cross-references for 27219

• Manufacture of radar instruments, wireless remote controls, and other aviation radio equipment ( 27211 )
• Manufacture of compasses for direction finding ( 27211 )

Index entries for 27219

140 entries from the official KSIC alphabetic index that classify under this code.

• Manufacture of protractors (for drafting)
• Manufacture of scissor gauges
• Manufacture of calculation scales (rulers)
• Manufacture of balances for pharmaceutical use
• Manufacture of dial gauges
• Manufacture of sample balances (for measuring the weight of paper, fabric, etc.)
• Manufacture of specific gravity (or special specific gravity) balances (for measuring the special specific gravity of liquids or solids)
• Manufacture of parts dedicated to precision scales
• Manufacture of steel measuring tapes
• Manufacture of distance measuring instruments (for drafting and design)
• Manufacture of gauges (resin type, adjustable measuring devices)
• Manufacture of gauge blocks
• Manufacture of block gauges
• Manufacture of design tools
• Manufacture of other design tools
• Manufacture of design plotters equipped with drafting boards
• Manufacture of standard rods
• Manufacture of other semiconductor manufacturing design, calculation, and measuring instruments
• Manufacture of other design, calculation, and measuring instruments
• Manufacture of rulers (measuring tapes, scales)
• Manufacture of scales (loss scales; loss of up to 50 milligrams)
• Manufacture of electronic precision scales
• Manufacture of other precision scales
• Manufacture of electron microscopes (non-optical type, electrons instead of light) Beam usage)
• Manufacture of scanning electron microscopes
• Manufacture of resin-type length measuring instruments (excluding devices specially designed to be fixedly mounted on a stand or other support for measurement, or connected to a machine or other equipment via flexible tubes or cables)
• Manufacture of depth gauges
• Manufacture of measuring sticks
• Manufacture of angle block gauges
• Manufacture of other parts dedicated to non-optical microscopes
• Manufacture of other parts dedicated to semiconductor manufacturing design, calculation, and measurement instruments
• Manufacture of other length measuring devices (resin type)
• Manufacture of pantographs
• Manufacture of other drafting tools, design tools, and calculation tools
• Manufacture of spring bow compasses
• Manufacture of drafting pens
• Manufacture of drafting design instruments
• Manufacture of textile balances
• Manufacture of balances for quantitative chemical analysis
• Manufacture of analytical balances (microchemical balances, microbalances, non-vibrational analysis balances)
• Manufacture of weight reduction balances (weight reduction of 50 milligrams or less)
• Manufacture of angle measuring instruments (drafting and For design)
• Manufacture of drawing machines
• Manufacture of center punches
• Manufacture of cylindrical calculators
• Manufacture of perfectly flat rulers for lining
• Manufacture of right-angle rulers for lining (made of cast iron, stone, etc.)
• Manufacture of V-blocks and X-blocks for lining (for supporting cylindrical workpieces)
• Manufacture of adjusters
• Manufacture of cutting scales
• Manufacture of rulers and discs for calculating photographic exposure times (calculated according to weather, time, aperture, subject type, and photosensitive emulsion conditions)
• Manufacture of T-rules (standard T-rules)
• Manufacture of curve rulers
• Manufacture of drafting stencils
• Manufacture of lining tools
• Manufacture of beam compasses (for marking points, used in woodworking, etc.)
• Manufacture of navigational plotting instruments
• Manufacture of calculators for semiconductor manufacturing
• Manufacture of coordinate plotters
• Manufacture of drafting tools for semiconductor manufacturing
• Manufacture of drafting machines combined with automatic data processing machines
• Manufacture of drafting compasses, reduction machines for precision measurement (scales
• Manufacture of scales (minus weight of 50 milligrams or less) for the smallest measurable amount
• Manufacture of drafting dividers
• Manufacture of reduction compasses
• Manufacture of vertical measuring instruments (equipped with movable connecting devices)
• Manufacture of map measuring instruments (curvilinear scales)
• Manufacture of distance measuring instruments for mapping, design, etc.
• Manufacture of micrometer extension anvils
• Manufacture of pocket-type calculation tools (used for addition and subtraction using a stylus)
• Manufacture of calculation tables
• Manufacture of surface plates for lining or planar inspection
• Manufacture of segmented T-rules
• Manufacture of protractors
• Manufacture of protractors (for measurement)
• Manufacture of graduated straight rulers and tape measures
• Manufacture of dedicated parts for electron microscopes (non-optical)
• Manufacture of hinges for folding rules
• Manufacture of stands for slip gauges
• Manufacture of compasses for students
• Manufacture of measuring rods (for drafting and design)
• Manufacture of measuring rulers
• Manufacture of measuring tapes
• Manufacture of compasses (for drafting and design)
• Manufacture of T-rules
• Manufacture of plastic rulers
• Manufacture of parts dedicated to scale guides
• Manufacture of educational materials for students (drafting and design tools, etc.)
• Manufacture of steel tape measures
• Manufacture of microscopes (non-optical)
• Manufacture of electron beam microscopes (for handling and transporting semiconductor wafers or reticles)
• Manufacture of other non-optical microscopes
• Manufacture of parts dedicated to electron beam microscopes
• Manufacture of straight rulers without scales
• Manufacture of screwless type micrometers
• Manufacture of vernix calipers
• Manufacture of dial-indicated calipers
• Manufacture of electronic calipers
• Manufacture of gauges (those with adjustable measuring devices)
• Manufacture of diffraction apparatuses (non-optical)
• Manufacture of electronic diffraction apparatuses
• Manufacture of parts dedicated to other drafting, design, and calculating tools
• Manufacture of other drafting tools
• Manufacture of length measuring tools for semiconductor manufacturing (resin type)
• Manufacture of precision scales
• Manufacture of precision measuring instruments (drafting and For design purposes; resin type)
• Manufacture of surface plates (design tools)
• Manufacture of drafting instruments
• Manufacture of drafting machines
• Manufacture of automatic drafting machines
• Manufacture of scale drawing machines (for drafting and design)
• Manufacture of drafting tools
• Manufacture of quantum microscopes (those utilizing quanta with wavelengths 40 times shorter than electrons)
• Manufacture of drafting plotters
• Manufacture of design plotters
• Manufacture of abacuses (excluding toy versions)
• Manufacture of tape measures
• Manufacture of map measuring instruments
• Manufacture of direct reading balances
• Manufacture of dial-type comparators (manual)
• Manufacture of screw-type micrometers
• Manufacture of measuring rods (straight rulers)
• Manufacture of graduated straight rulers
• Manufacture of right-angle rulers
• Manufacture of straight scales
• Manufacture of reduction balances (reduction within 50 milligrams)
• Manufacture of rulers (for measurement), non-optical microscopes
• Manufacture of non-optical cutting instruments
• Manufacture of calipers
• Manufacture of other drafting machines equipped with drafting boards
• Manufacture of eidographs
• Manufacture of dotted lines, straight rulers Manufacturing
• Manufacturing of metal tape measures
• Manufacturing of length measuring instruments (resin type)
• Manufacturing of design tools for semiconductor manufacturing
• Manufacturing of screw spacing measuring instruments
• Manufacturing of drum wound rules
• Manufacturing of calculating tools
• Manufacturing of micrometer stands
• Manufacture of Vernier calipers, joints for folding rules, balances for precious metals, micrometers, bite gauges, screw gauges, measuring tapes, V-shaped rulers for measuring iron face diameters, spring chucks, ribbed rules, measuring instruments for det

27219 in other systems