KSICSubclass
KSIC 29119—Manufacture of other engines and turbines
Subclass · Korean Standard Industrial Classification (Rev. 11 (2024))
Where 29119 sits
Description
Includes industrial activities manufacturing engines and turbines other than internal combustion engines, wind engines, and hydroelectric engines, etc.
Example activities
- manufacture of steam engines
- manufacture of steam turbines
- manufacture of gas turbines
- manufacture of thrust-driven motors
- manufacture of spring-driven motors
- manufacture of hydroelectric turbines
- manufacture of turbine parts such as regulators
Cross-references for 29119
29119 in other systems
Looking up equivalents…
Index entries for 29119
156 entries from the official KSIC alphabetic index that classify under this code.
- Manufacture of other generator sets (those with an output exceeding 750 kilovolt-amperes) (excluding wind-type generator sets, other turbine-type generator sets)
- Manufacture of parts dedicated to wind turbines
- Manufacture of parts dedicated to other generators and motors (for turbine-type generator sets)
- Manufacture of wind engines (including all prime movers (wind engines or wind turbines) that directly convert wind power striking propeller or rotor blades into mechanical energy)
- Manufacture of wind-type engines and motors
- Manufacture of wind engines for irrigation pumps
- Manufacture of wind engines for drainage pumps
- Manufacture of wind engines for generator drives
- Manufacture of disks or wheels for gas turbine rotors
- Manufacture of blades and fins for gas turbines
- Manufacture of fuel supply controllers for gas turbines
- Manufacture of fuel nozzles for gas turbines
- Manufacture of other turbojet engines (those with a thrust of 25 kilonewtons or less, excluding aircraft)
- Manufacture of marine turbojet engines (those with a thrust of 25 kilonewtons or less)
- Manufacture of turbojet engines for other uses (those with a thrust of 25 kilonewtons or less) (other than for aircraft and ships), and other
- Manufacture of turbojet engines (those with a thrust exceeding 25 kilonewtons, excluding aircraft)
- Manufacture of steam turbines (turbines driven by applying the kinetic energy of expanded steam to a vane or blade of wheel)
- Manufacture of impact steam turbines
- Manufacture of reaction steam turbines
- Manufacture of combined steam turbines
- Manufacture of other steam turbines (those with an output exceeding 40 megawatts)
- Manufacture of wind power engines (windmills)
- Manufacture of wind power generation sets
- Manufacture of other linear acting hydroelectric engines
- Manufacture of reaction engines other than turbojets (excluding aircraft)
- Manufacture of other steam turbines (those with an output exceeding 40 megawatts and not exceeding 100 megawatts)
- Manufacture of other steam turbines (those with an output exceeding 100 megawatts and not exceeding 300 megawatts)
- Manufacture of other steam turbines (those with an output exceeding 300 megawatts), marine turbojet engines (those with a thrust
- Manufacture of (those exceeding 1,100 kilowatts)
- Manufacture of turbojet engines for other uses (those with a thrust exceeding 1,100 kilowatts) (excluding those for aircraft and ships)
- Manufacture of other gas turbines (those with an output of 5,000 kilowatts or less, excluding those for aircraft)
- Manufacture of other gas turbines for other uses (those with an output of 5,000 kilowatts or less, excluding those for aircraft and ships)
- Manufacture of other gas turbines (those with an output exceeding 5,000 kilowatts, excluding those for aircraft)
- Manufacture of other gas turbines for other uses (those with an output exceeding 5,000 kilowatts, excluding those for aircraft and ships)
- Manufacture of parts dedicated to turbojets and turboprops (excluding those for aircraft), and parts dedicated to other gas turbines Manufacturing (excluding for aircraft)
- Manufacturing of gas turbine-specific parts
- Manufacturing of engines (steam engines)
- Manufacturing of general-purpose steam engines
- Manufacturing of steam turbines for power plants
- Manufacturing of wind power generation sets (a form in which the motor is integrally combined with the generator)
- Manufacturing of wind power systems for aircraft wake operation
- Manufacturing of wind power generation sets (those with an output of 75 kilovolt-amperes or less)
- Manufacturing of wind power generation sets (those with an output exceeding 75 kilovolt-amperes and not exceeding 750 kilovolt-amperes)
- Manufacturing of wind power generation sets (those with an output exceeding 750 kilovolt-amperes)
- Manufacturing of turbine speed regulators (governors)
- Manufacturing of steam turbine rotors
- Manufacturing of steam turbine stators
- Manufacturing of parts dedicated to steam turbine rotors and stators
- Manufacturing of water turbines for small factories
- Manufacturing of water turbines for sawmills
- Manufacturing of water turbines for flour mills
- Manufacturing of hydraulic turbine rotors, for ships
- Manufacture of turbojet engines (those with a thrust of 1,100 kilowatts or less)
- Manufacture of turbojet engines for other uses (those with a thrust of 1,100 kilowatts or less) (excluding those for aircraft and ships)
- Manufacture of other turbojet engines (those with a thrust exceeding 1,100 kilowatts, excluding those for aircraft)
- Manufacture of gas engines (gas turbines)
- Manufacture of simple circulation gas turbines
- Manufacture of regenerative circulation gas turbines
- Manufacture of single-shaft gas turbines
- Manufacture of twin-shaft gas turbines
- Manufacture of gas turbines for locomotives
- Manufacture of stators for hydroelectric turbines
- Manufacture of casings for spiral conduits for hydroelectric turbines
- Manufacture of blades and buckets for rotors and stators for hydroelectric turbines
- Manufacture of automatic governors for rotors and stators for hydroelectric turbines
- Manufacture of valve needles for automatic governors for hydroelectric turbines
- Manufacture of other hydroelectric engines and motors (excluding hydraulic equipment)
- Manufacture of water turbines for power generation
- Manufacture of turbines for ship propulsion, steam turbines for ship propulsion Manufacturing
- Manufacturing of hydroelectric engines (products other than hydroelectric turbines)
- Manufacturing of hydroelectric engines utilizing Savonius rotors
- Manufacturing of hydroelectric engines (products utilizing waves)
- Manufacturing of hydroelectric engines (products utilizing ocean waves)
- Manufacturing of hydroelectric engines (products utilizing tides)
- Manufacturing of water column machines (machines that operate pistons using water pressure)
- Manufacturing of connecting rods for wind turbines
- Manufacturing of Pelton-type hydroelectric turbines (used in cases of relatively low water volume and high head)
- Manufacturing of Francis-type hydroelectric turbines (used in cases of abundant water volume and medium or low head)
- Manufacturing of Kaplan-type hydroelectric turbines (used in cases of low head)
- Manufacturing of hydroelectric turbines for hydroelectric power generation
- Manufacturing of other power generation sets (excluding wind-type, other turbine-type power generation sets)
- Manufacturing of other power generation sets (those with an output of 75 kilovolt-amperes or less) (excluding wind-type, Other turbine-type generator sets)
- Manufacture of other generator sets (those with an output exceeding 75 kilovolt-amperes and not exceeding 375 kilovolt-amperes) (excluding wind-type generator sets)
- Manufacture of other steam turbines (those with an output of 40 megawatts or less)
- Manufacture of parts dedicated to steam turbines
- Manufacture of parts dedicated to steam turbines for marine propulsion
- Manufacture of other generator sets (those with an output exceeding 375 kilovolt-amperes and not exceeding 750 kilovolt-amperes) (excluding wind-type generator sets)
- Manufacture of pistons for wind engines
- Manufacture of slide valves for wind engines
- Manufacture of flyweight-type governors for wind engines
- Manufacture of other engines and motors not otherwise classified
- Manufacture of parts dedicated to hydroelectric engines and motors (excluding those for hydraulic equipment), blower holes for jet enginesManufacture of vent) (excluding for aircraft engines)
- Manufacture of airwheels for wind engines
- Manufacture of hydroelectric turbines and water turbines (those with a power of 1,000 kilowatts or less)
- Manufacture of hydroelectric turbines (those with a power of 1,000 kilowatts or less)
- Manufacture of water turbines (those with a power of 1,000 kilowatts or less)
- Manufacture of water turbines (those with a power exceeding 1,000 kilowatts but not exceeding 10,000 kilowatts)
- Manufacture of water turbines (those with a power exceeding 10,000 kilowatts)
- Manufacture of parts dedicated to hydroelectric turbines and water turbines
- Manufacture of regulators for hydroelectric turbines and water turbines
- Manufacture of regulators for hydroelectric turbines
- Manufacture of regulators for water turbines
- Manufacture of parts dedicated to hydroelectric turbines and water turbines (other than regulators)
- Manufacture of parts dedicated to hydroelectric turbines (other than regulators)
- Manufacture of parts dedicated to water turbines (other than regulators)
- Manufacture of blades for steam turbine rotors and stators, for hydroelectric turbines
- Manufacture of regulators
- Manufacture of mercury steam turbines
- Manufacture of parts dedicated to water turbines
- Manufacture of water turbines
- Manufacture of spring-actuated motors
- Manufacture of steam turbines
- Manufacture of parts dedicated to turbines
- Manufacture of turbines (for hydroelectric, steam, wind power, etc.)
- Manufacture of wind engines
- Manufacture of windmills
- Manufacture of propeller turbines (for marine use; steam type)
- Manufacture of steam turbines for thermal power generation
- Manufacture of gas turbines for pipelines
- Manufacture of industrial gas turbines
- Manufacture of gas turbines for hydraulic and pneumatic drive systems
- Manufacture of gas turbines for the petrochemical industry
- Manufacture of non-combustion chamber gas turbines
- Manufacture of compressed air gas turbines
- Manufacture of other gas turbines (excluding compressed air type)
- Manufacture of rotors for gas turbines
- Manufacture of parts dedicated to engines and motors not otherwise classified (excluding those for hydraulic equipment)
- Manufacture of marine turbojet engines (those with thrust exceeding 25 kilonewtons)
- Manufacture of turbojet engines for other uses (those with thrust exceeding 25 kilonewtons) (excluding those for aircraft and ships), and others.
- Manufacture of turbojet engines (those with a thrust of 1,100 kilowatts or less, excluding aircraft)
- Manufacture of gas turbines (excluding turbojets and turboprops)
- Manufacture of marine gas turbines
- Manufacture of marine steam engines
- Manufacture of hydroelectric turbines
- Manufacture of steam engines
- Manufacture of weight-driven motors
- Manufacture of other parts dedicated to steam turbines
- Manufacture of combustion chambers for jet engines (excluding aircraft)
- Manufacture of spring-driven motors (for mechanisms using energy generated when a spring is released) (excluding those for clock mechanisms equipped with or suitable for attachment of escapements)
- Manufacture of gravity-driven (counterweights and other similar devices) motors
- Manufacture of spring-driven motors for music boxes (musical boxes)
- Manufacture of spring-driven motors for automatic turnspits
- Manufacture of spring-driven motors for rotary display window devices
- Manufacture of spring-driven motors for various registration and recording devices
- Manufacture of spring-driven motors for engraving tools
- Manufacture of steam piston external combustion engines
- Manufacture of steam piston single-acting engines (boilers (unassembled parts)
- Manufacture of steam piston double-acting engines (boiler unassembled parts)
- Manufacture of steam piston external combustion engines for railway locomotives
- Manufacture of steam piston external combustion engines for ships
- Manufacture of single-expansion steam engines
- Manufacture of compound piston steam engines
- Manufacture of steam or other steam prime movers (with boilers)
- Manufacture of cylinders for wind enginesManufacturing of wind power generation sets
- Manufacturing of cylinders for wind enginesManufacturing of wind power generation sets
- Manufacturing of cylinders for wind engines